| 43125/43319D Timken Tapered Roller Bearings | Grease Speed Rating n1:2100 rpm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:425000 N; B:70.00 mm; D:320.0000 mm; d:110.000 mm; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:319000 N; Oil Speed Rating n2:2600 rpm; |
| 7100S/07196D Timken Tapered Roller Bearings | Fillet Radius ra:2.50 mm; Accessories:One Shield; B:82.60 mm; Basic Static Radial Load Rating Co:255000 N; Oil Speed Rating n2:2600 rpm; Sealed Speed Rating n3:1800 rpm; D:215.0000 mm; d:100.000 mm; Grease Speed Rating n1:1800 rpm; Basic Dynamic Radial Load Rating C:255000 N; |
| 464/452D Timken Tapered Roller Bearings | d:30.163 mm; GN:1/4-28 SAE-LT; Da:76.2 mm; Recommended tightening torque for grub screw:4 N·m; Mass bearing unit:0.82 kg; Recommended diameter for attachment bolts, mm G:10 mm; s1:21 mm; SWN:7 mm; Limiting speed:6300 r/min; B:30.2 mm; J:116.5 mm; A3:3.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; H:141.5 mm; A5:22.5 mm; Basic static load rating C0:11.2 kN; N4:2 mm; N:11.5 mm; |
| 55200/55433D Timken Tapered Roller Bearings | H:212 mm; Cap bolt, rec. tightening torque:150 N·m; J:290 mm; Bearing (basic designation):22219 K; End cover:ASNH 519-616 R; H1:112 mm; Mass housing:13.7 kg; Appropriate attachment bolt, rec. tightening torque:200 N·m; Ca:68 mm; H2:35 mm; Q180°:200 kN; J1:50 mm; Q150°:230 kN; P180°:290 kN; Da:170 mm; N1:18 mm; Oil level, max.:45 mm; Pa:190 kN; Locating ring:2 x FRB 12,5/170; |
| 44162/44363D Timken Tapered Roller Bearings | Flange design:Flange with metric a; d:30 mm; D:120 mm; GF:M8x1.25; b:1.3 mm; Purpose/ Application:Slurry fertilizer; J:100 mm; Basic dynamic load rating C:44.9 kN; Mass:0.69 kg; Basic static load rating C0:31 kN; Sealing system:SKF Mudblock seal; Housing material:Glass fibre-reinforc; Shaft design:Without shaft; B:41 mm; |
| 14125A/14276D Timken Tapered Roller Bearings | Grease Speed Rating Open/Shielded n1:9500 rpm; Accessories:Two Shields & Snap-R; D:68.0000 mm; Sealed Speed Rating n3:6300 rpm; d:40.000 mm; Basic Dynamic Radial Load Rating C:20800 N; Fillet Radius ra:1.00 mm; B:15.00 mm; Basic Static Radial Load Rating Co:11600 N; Oil Speed Rating Open/Shielded n2:12000 rpm; |
| NA366/363D Timken Tapered Roller Bearings | Initial grease fill:379.89 g; ba:53.975 mm; Da:210 mm; R2:30.163 mm; P180°:107 kN; Ca:72.619 mm; H1:133.35 mm; P120°:94.3 kN; P150°:87.2 kN; Stabilizing ring:2 x 36053-50; H2:53.975 mm; A2:250.825 mm; Pa:22.2 kN; da:125.412 mm; h:46.038 mm; Cap bolt, SAE grade:8; Mass pillow block:61.2 kg; L:419.1 mm; P60°:249 kN; Max. speed for Taconite seal:625 r/min; |
| 358A/353D Timken Tapered Roller Bearings | rb max.:0.3 mm; Ball diameter Dw:7.938 mm; Static axial stiffness, preload class A:137 N/µm; Preload class B GB:240 N; Fatigue load limit Pu:0.585 kN; Calculation factor f:1.15; Calculation factor f1:0.98; Calculation factor f2D:1.17; Basic dynamic load rating C:18.2 kN; Db max.:78 mm; db min.:59.6 mm; Static axial stiffness, preload class C:234 N/µm; Calculation factor f2A:1; ra max.:1 mm; |